Table of Contents
Advertisement
Transformer operations
Locking your locomotive into a single operational state
T
o select a single operational state for your Lionel locomotive (for example, forward only),
you can deactivate the reverse unit's sequencing function with the reverse unit switch.
Get your locomotive moving in the desired direction, then slow it down without stopping.
Set the reverse unit switch to LOCK. Refer to Figure 1 for the location of the switch. The
locomotive is now "locked" into your chosen direction.
When you no longer want single-direction operation, just slide the switch back to RUN.
Your locomotive's reverse unit will "reset" to forward after any power interruption
Note!
lasting five seconds or longer, regardless of the original locked-out direction.
Reverse unit
switch
RUN
LOCK
SMK
NO SMK
Smoke unit switch
(see page 8 for
details)
Figure 1. Switch locations
5
Turn truck
for switches
Horn switch
SND
NO SND
Advertisement
Table of Contents
