Locking Your Interurban Car Into A Single Operational State - Lionel Interurban (M.U.) Car Owner's Manual

Transformer operations

Locking your Interurban Car into a single operational state

T o select a single operational state for
your Lionel Interurban Car (example:
forward only), you can deactivate the
reverse unit's sequencing function with the
reverse unit switch.
Get your locomotive moving in the desired
direction, then slow it down without
stopping. Set the Command reverse unit
switch to PGM. Refer to Figure 1 for the
location of the switch. The Interurban Car is
Volume
Control Knob
Figure 1. Switch locations
Command reverse unit switch
PGM RUN
RailSounds switch
OFF ON
now "locked" into your chosen direction.
When you no longer want single-direction
operation, just slide the Command reverse
unit switch back to RUN.
Your locomotive's reverse unit will
Note!
"reset" to forward after any five
second or longer power interrup-
tion, regardless of the original
locked-out direction.
5