Table of Contents
Advertisement
CHAPTER 1: INTRODUCTION
HOW TO USE THIS MANUAL
Make sure to read these operating instructions in their
entirety before configuring a loudspeaker system with
UPJuniors. In particular, pay close attention to material
related to safety issues.
As you read these operating instructions, you will encounter
the following icons for notes, tips, and cautions:
NOTE:
A note identifies an important or useful
piece of information relating to the topic under
discussion.
TIP:
A tip offers a helpful tip relevant to the topic
at hand.
CAUTION:
A caution gives notice that an
!
action may have serious consequences and
could cause harm to equipment or personnel, or
could cause delays or other problems.
Information and specifications are subject to change.
Updates and supplementary information are available on the
®
Meyer Sound
website:
http://www.meyersound.com
Meyer Sound Technical Support is available at:
■
Tel: +1 510 486.1166
■
Fax: +1 510 486.8356
■
Email: techsupport@meyersound.com
INTRODUCING THE UPJUNIOR COMPACT
VARIO LOUDSPEAKER
The UPJunior™ compact VariO™ loudspeaker combines
the advantages of self-powered systems with the placement
and arraying flexibility afforded by a VariO rotatable horn.
Compact and lightweight, the UPJunior produces a robust
peak power output of 126 dB SPL at 1 meter, making it suit-
able for use as either a primary loudspeaker in small rooms,
or as a fill, delay, effects or under-balcony loudspeaker in
small to medium-sized distributed systems.
UPJunior Compact VariO Loudspeaker
The UPJunior's low-frequency section employs an 8-inch
neodymium magnet cone driver, while the high-frequency
section uses a proprietary 0.75-inch exit, 2-inch diaphragm
compression driver. The VariO horn can be easily rotated to
provide an 80° x 50° coverage pattern with either a horizon-
tal or vertical orientation. A two-channel class AB/Bridged
power amplifier with complementary MOSFET output stages
provides a total output of 300 watts for the low- and high-
frequency sections. The optional RMS™ module allows
comprehensive monitoring of all key system parameters
®
from a Windows
-based computer.
The UPJunior's end plates — made of heavy-duty, high-
strength, corrosion-resistant 6061-T6 aluminum — provide a
wide range of mounting, flying, and arraying options. Strate-
gically placed M8 threaded holes allow basic eyebolt hang-
ing as well as easy connection to third-party pole-mounting
options. QuickFly
®
rigging options, which include an array
adapter (also made of 6061-T6 aluminum), yokes, and
U-brackets, attach easily and securely to the UPJunior,
allowing it to be mounted or flown as either a single cabinet
or within arrays.
7
Advertisement
Table of Contents
