Permobil X850 Service Manual page 47

Permobil X850
Replacing the Main Fuse
1. Place the wheelchair on a level surface. If the chassis
has an electric seat lift, raise the seat to the highest
position. If the seat lift does not work normally be-
cause the batteries are discharged or the motor is de-
fective, see page 22. If the chassis has a fixed seat,
tip the seat forwards. See page 22.
2. Switch off the power supply using the ON/OFF key on
the control panel and switch the automatic main fuse
to Off. It is accessible via a recess on the chassis.
See the illustration.
3. Remove the front chassis cover. See page 7.
4. Remove the front battery connections. See the
illustration.
5. Remove the main fuse. It is held in place with three
screws. See the illustration.
6. Detach the cables from the main fuse by unscrewing
the screws. See the illustration.
7. Switch the new main fuse to OFF.
8. Attach the cables to the new main fuse.
NOTE!
Check that the cables are firmly attached.
9. Fit the new main fuse on the chassis with the three
screws.
NOTE!
Note the direction in which the fuse is installed. The
ON/OFF position must match the appropriate sticker
on the chassis.
10. Reattach the battery connection cables to the
batteries.
11. Refit the chassis cover. See page 7.
12. Switch the main fuse to ON. See the illustration on
the previous page.
Figure 75. Main fuse cable connection.
Figure 72. Front battery connections.
Figure 73. The main fuse is held in place with 3 screws
Figure 74. The main fuse is held in place with 3 screws.
Repairs
47