Permobil X850 Service Manual page 14

Permobil X850
Removing the front mudguard
The front mudguards are held in place with four screws
each.
1. Unscrew and remove the four screws that hold the
front mudguard in place. See fig. 7.
2. Lift the mudguard up.
To divide the light cabling, remove the foot plate. See Re-
moving the footplate. Then divide the cabling at the con-
tact on the cabling.
For removal of the lights, see Front lights, Page 49.
Assembly of the front mudguard
Assemble the front mudguard in the reverse order.
Removing the front's bottom plate
The front's bottom plate is held in place with six screws.
1. Unscrew and remove the eight screws that hold the
bottom plate in place. See 8.
Assembly of the front's bottom plate
Assemble the front's bottom plate in the reverse order.
14
Figure 7. The front mudguard is held in place with 4
screws.
Figure 8. The front's bottom plate is held in place with
eight screws.
Repairs