Permobil X850
Shock absorbers
Removal
1. Switch off the power supply with the On/Off key on
the control panel.
2. Lift up and chock up the wheelchair chassis so that
the wheel in question is free of the ground.
L
WARNING!
The wheelchair must not be lifted by the seat or
seat lift as this can damage the wheelchair and its
components.
3. Remove the screw, nut and washers on the lower
mounting of the shock absorber. See the illustration.
4. Remove the screw, nut and washers on the upper
mounting of the shock absorber. See the illustration.
Figure 19. The wheelchair's two shock absorbers.
Figure 20. The shock absorber is held in place with
screws, washers and nuts.
Repairs
23