Permobil X850
Steering knuckle suspension and
bearings
Removal
L
WARNING!
The wheelchair must not be lifted by the seat or seat lift
as this can damage the wheelchair and its
components.
1. Switch off the power supply with the On/Off key on
the control panel.
2. Raise and chock up the front.
3. Remove the front mudguard. See page 8.
4. Remove the front wheel. See page 13.
5.
Remove the steering connecting rod. It is held in
place with one nut (2). See the illustration.
6. Remove the screw, washer and the plastic plug fas-
tener (1) of the steering connecting rod.
7.
Remove the plastic plug from the top of the steering
coupling. See the illustration.
8. Remove the screw that holds the steering knuckle in
place. Then lift the steering knuckle straight up. See
the illustration.
36
Figure 50. The steering connecting rod is held in place
with one nut.
Figure 51. The steering knuckle is held in place with one
screw.
Repairs