Brake Release Switch - Permobil X850 Service Manual

Permobil X850

Brake release switch

Removal
1. Remove the chassis covers. See page 7.
2. Switch the main fuse to OFF. See page 36.
3. Remove the brake release mechanism. It is held in
place with two screws. See the illustration.
4. Remove the brake release switch. It is held in place
with two screws. See the illustration.
L
CAUTION!
If the switch is to be replaced, its connection cables
have to be resoldered.
Item Description
1. Switch, VK08N001A
2. Screw, ISO 4017 M3x20 8.8 Fe/Zn 5 C1
3. Washer, ISO 7089 3 200 HV Fe/Zn 5 C1(3.2x7x0.5)
Assembly
Install in the reverse order.
26
Figure 26. The brake release mechanism is held in place
with two screws.
Figure 27. Brake release switch
Repairs