Permobil X850
Bushings in wheelbase adjustment
Replacement
1. Switch off the power supply using the ON/OFF key on the control panel and switch the automatic main fuse to Off.
It is accessible via a recess on the chassis. See page 36.
2. Remove the front. See page 27.
3. Use Permobil's special tool (Art. no.: INR8205) or remove the bushings from the chassis in some other way.
4.
Press in new bushings. Press the inner bushing in to the edge of the recess for the stop lug. The outer bushing
should be level with the front edge of the tube. See the illustration. Use Permobil's special tool (Art. no.: INR8205)
or fit the bushings in some other way.
5. Refit the front in the chassis. See page 27. When fitting the stop lug, glue the threads of the four screws with Loc-
tite 628.
42
Figure 61. Wheelbase adjustment bushings.
Repairs