Permobil X850 Service Manual page 25

Permobil X850
Assembly
1. First fit the cable at the release lever, then at the mag-
netic brake.
2. Adjust the cable sleeve length with the adjusting
screw (2) so that the cable is tensioned so that the
brake release switch is activated immediately before
the cable pulls the release shackle.
3. Check that the wheel cannot be turned before the
brake release switch has been activated.
4. Check that the wheel can be turned when the brake
release has been released with the release lever.
5. Tighten the locking nut (1).
6. Refit the brake release mechanism and the chassis
covers.
Figure 24. Brake release switch.
Figure 25. Brake release mechanism.
Repairs
25