Table of Contents
Advertisement
Step 5. Repeat the process for the other elevator half
Step 6. Measure 1/2" from the bottom of the left side of the
rudder. Mark the location with a felt-tipped pen or pencil. This
mark will serve as the center for the rudder control horn.
Step 7. Center the control horn over the mark you've just made.
Make sure the horn is positioned over the hinge line, just like
you did for the elevator. Using a felt-tipped pen or pencil, mark
the mounting hole locations onto the rudder.
22
Step 8. Drill these holes with a 1/16" drill bit and install the
rudder control horn using the screws and backplate provided.
Hide quick links:
Advertisement
Table of Contents
