Cargo Tie Down Rings - Mercedes-Benz R 350 BlueTEC 2012 Operator's Manual

X
Pull release lever ; upwards beyond the
pressure point to the stop and fold
backrest : upwards by about 45 ˚.
X
Insert the head restraint (
X
Pull release lever ; to the pressure point
and adjust backrest : to the desired
position.
X
Check that the seat is correctly engaged.
X
Set the seat head restraint to the desired
position ( Y page 100).
Lock verification indicator for the outer
seats in the 2nd row of seats
Seat unlocked
When the seat is unlocked, lock status
indicator : is folded out and indicator
area ; is clearly visible.
X
When the seat is unlocked, fold the
backrest back until you hear the seat
engage.
Seat locked
When the seat is locked, lock status
indicator : is folded in and indicator
area ; is barely visible.
Y page 100).
Resetting the center seat in the 2nd row
of seats
Armrest position
X
X
X
X
Cargo tie-down rings
Observe the following notes on securing
loads:
R
R
R
R
I n f o r ma t i o n P r o v i d e d b y :
Pull release loop : of seat ; in the
direction of the arrow and hold it securely.
The seat is released and folds up.
Press seat ; further down until the back
of the seat engages in the armrest position.
Pull release loop : of the backrest in the
direction of the arrow and hold it securely.
Fold the backrest backwards until you hear
it engage.
Securing cargo
secure the load using the cargo tie down
rings.
do not use elastic straps or nets to secure
a load, as these are only intended as an
anti-slip protection for light loads.
do not route tie downs across sharp edges
or corners.
pad sharp edges for protection.
Stowage areas
Z
257