Dexcom G5 Mobile Quick Start Manual page 13

Setting Up Your App (cont.)
D
n
Settings
Set your volume loud enough to hear your
Low and High Alerts.
If Do Not Disturb is enabled, you will not
receive audible or vibratory alerts.
The app will not override your smart device
settings.
Bluetooth on your smart device needs to be
ON in order for the system to work.
n
Transmitter Serial Number (SN)
Take a photo of the barcode on the bottom
of your transmitter box or enter transmitter
SN by hand.
n
Sensor/Transmitter
Watch the in app video to help you insert
your sensor and attach your transmitter.
n
Transmitter Pairing
After inserting your sensor and attaching your
transmitter, your transmitter will connect to
your app using Bluetooth. This can take up to
30 minutes. Tap Pair on the pairing request.
n
2-hour Sensor Warmup
Tap the circle to start your 2-hour sensor
warmup. When you see the sensor warmup
timer, your set up is complete.
Dexcom G5 Mobile CGM System Quick Start Guide • 11