Siemens OpenStage15 Operating Manual page 65

Step by step
User
Configuration
Connected calls?
Allow hold rem. No
=
Yes
Options = Save & exit
User
Configuration
The held call is signaled as an incoming call after
a specified period of time.
Activating/deactivating the hold reminder tone
z You can also configure this setting via the Web interface
page 149.
N
Press the key shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Select and confirm the option shown.
Setting the hold reminder time
Use the "Hold reminder" function to set the time after
which you want to receive an automatic reminder about
a held call.
The minimum value is 1, that is, the reminder is output
after one minute. The maximum value is 99 minutes.
Press 0 to deactivate the delay.
z You can also configure this setting via the Web interface
page 149.
N
Press the key shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Enhanced phone functions
65