1.
Unpack heatsink wrench and thermal pads from accessory pack.
2.
Unscrew the four screws on heatsink by using wrench. (Figure 2.16)
3.
Remove original thermal pads (to protect CPU/ South Bridge) and paste new
thermal pads on heatsink. (Figure 2.17)
4.
Install memory on single board computer and screw back the heatsink. (Figure
2.16)
x1
x1
x1
MIOS-5250 User Manual
x1
x1
x1
Figure 2.15 Tool and component list
Figure 2.16 Illustration for step 2 and step 4
18
x1