Standards - ADS-tec VMT8000 series Instruction Manual

VMT8000 series

2.9 Standards

This device is compliant with the provisions and safety objectives of the following EU directives:
Standards
 This device is compliant with the CE mark test requirements as defined in the
European test standards EN 55022 and EN 61000-6-2
 This device is compliant with the DIN EN 60950 (VDE0805, IEC950) testing
specifications on "Information technology equipment – Safety"
 This device is compliant with the DIN EN 60068-2-6 testing specifications
(sinusoidal vibration)
 This device is compliant to the DIN EN 60068-2-27 (shock and bump) testing
specification
By using the CE conformity declaration in this document, you can find detailed information about the
standards applicable to this device.
For full compliance with the EMC legislation, all components and cables used for device connection
must also be compliant with these requirements.
Recommendation for use:
Always use shielded bus and LAN cables with shielded plugs.
ATTENTION
Interference in residential environments
This is a class A device. Class A devices may
cause interference when used in residential
environments.
 In this case, the operator can be requested to
take appropriate measures and to pay any costs
incurred as a result.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
7