Table of Contents
Advertisement
VMT8000 series
Operating the soft keyboard:
Recommendation for use:
If functions are to be called for which two keys must be pressed
simultaneously on a standard keyboard (e.g., Alt + F4), these keys are to be
pressed in sequence on the soft keyboard.
The Shift, Alt and Ctrl special keys must always be pressed first.
Due to differences in programming of a large variety of software programs,
we cannot ensure that the soft keyboard works properly with all available
software.
When deactivating the soft keyboard, the previously active state
(alphanumeric / numeric keys or function keys) will be stored and will be
displayed when re-activating the keyboard.
Recommendation for use:
The functional description of the program Soft keyboard can be found in the chapter
of the same name for the Configuration Center.
Pos : 22 /D atentec hni k/Bedienung/T ouch Scr een/T ouch Scr een für VMT 60xx @ 1\mod_1246361069977_6.doc @ 5853 @
7.3 Touch screen
The control system is equipped with a touch screen monitor. The driver software necessary for use is
already included in the respective operating system or can be downloaded from the company's website
www.ads-tec.de/.
Pos : 23 /D atentec hni k/Bedienung/Status-Anzeig en/SYS- LED/SYS- LED für VMT 60xx- Serie @ 2\mod_1260525540269_6.doc @ 6876 @
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
Activate and deactivate the soft keyboard for character input using
the touch screen
Switches numeric keys on and off (only if numeric keys are visible)
Switching between different representations (Alphanumeric keys
Numeric keys Position keys)
View of numeric keys
Soft keyboard representation, zoom in
Soft keyboard representation, zoom out
View of position keys
30
Advertisement
Table of Contents
