Environmental Conditions - ADS-tec VMT8000 series Instruction Manual

VMT8000 series

2.8 Environmental conditions

The device can be put into operation and used under the following conditions. Failure to observe any
one of these conditions will invalidate the warranty. ads-tec cannot be held liable for any damages
arising from improper use and handling.

Temperature for devices without a heater
in operation*
for storage

Temperature for devices including a heater
in operation*
for storage

Humidity
In operation
For storage

Air quality: Air pollution level 3 or lower according to
This device is compliant to the DIN EN 60068-2-27 (shock and bump) testing
specification

Vibration and shock resistance
EN 60721-3-5 (06.1998), class 5M2 for HDD version, class 5M3 (terrestrial
vehicles) for SSD version, 5 hours of noise-type vibrations; 3.6 g rms and 30 g
peak value
Additionally applies MIL-STD 810F (01.2000), annex C, figure 514.5C
(US highway truck transportation)
*(depending on mass storage device)
** The UL marking applies for operating temperatures up to max. 40°C and for devices without heater.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
-20 ... 55°C**
-30 ... 60°C
-30 ... 55°C
-30 ... 60°C
10 ... 85% without condensate
10 ... 85% without condensate
6