Table of Contents
Advertisement
VMT8000 series
Recommendation for use:
The device can optionally be equipped with an external antenna.
Make certain that this antenna is connected in order to retain the expanded
antenna concept.
This antenna is connected in the service slot by means of an R-SMA plug.
This function is optional and must be installed at the factory.
ATTENTION
Hazard due to violation of transmit
frequencies
Due to the use of non-approved antennas
If an external antenna is used, which is not
approved by ads-tec, the operator/operating
company shall be responsible for compliance with
the regulatory and legal requirements.
Pos : 33 /D atentec hni k/Schnitts tell en/Seriell e Schnitts tell e C OM RS232/Serielle Sc hnitts tell e C OM (RS232) für VMT 60xx @ 1 \mod_1246373571514_6.doc @ 5876 @
8.2 Bluetooth (optional)
As an option, the device can be equipped with a Bluetooth wireless module at the factory.
The following Bluetooth standards are available:
Option
Option 1
Option 2
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
Name
Range
Bluetooth 2.0
Approx. 100m
Class 1
Bluetooth 2.0
Approx. 10-
Class 2
50m
34
Advertisement
Table of Contents
