Table of Contents
Advertisement
VMT8000 series
If no RFID reader was found, one has the option to select the serial interfaces at which the RFID reader
is connected.
Fig. 8:
After the COM port is selected, the application opens the interface which is then ready to receive data.
The data from a transponder are output on the user interface.
8.4.2 LEGIC
To test the RFID function, select a suitable editor (Notepad, Word) and hold the RFID tag up to the
RFID reader. The corresponding information is output.
Recommendation for use:
The data that are output can be adjusted in advance in consultation with
ads-tec to meet customer requirements .
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
37
Advertisement
Table of Contents
