Table of Contents
Advertisement
VMT8000 series
10 Software & driver installation
The device is equipped with a touch screen monitor. The touch-screen is connected internally via the
USB interface. The driver software necessary for use as well as the software for the soft keyboard are
already included in the respective operating system.
In the case of devices without preinstalled operating system, the drivers/software can be downloaded
from the website.
Recommendation for use:
If the hard drive has been reformatted, the operating system can be
reinstalled by using one of the existing interfaces.
An external keyboard is required for installation.
Installing the operating system
The device does not have any integrated CD drive. The installation of the operating system can
therefore only be carried out by using the USB interface.
Procedure for installation:
The boot drive in the system Bios must be switched to USB in order to boot
the device from the USB interface.
Restart the device and insert a Windows CD.
Install Windows and set up the basic data.
With devices including touch screens, the touch screen driver as well as the
soft keyboard should be installed in order to ensure their full functionality.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
39
Advertisement
Table of Contents
