Table of Contents
Advertisement
VMT7000 series
2.9 Standards
The manufacturer hereby declares that this device has been marked with the CE
mark in accordance with the basic requirements and other relevant conditions of
the following European Directives:
•
2011/65/EU, RoHs Directive
•
2014/30/EU, EMC Directive
•
2014/53/EU, RED Directive
•
2014/35/EU, Low Voltage Directive
The product is a class A device. Class A may cause interference when used in residential
environments.
A corresponding EC conformity declaration is available for competent authorities at the
manufacturer and can be viewed upon request.
The EC conformity declaration can be requested at
http://www.ads-tec.de/support/support-anfrage.html
http://www.ads-tec.de/support/download/eg-konformitaetserklaerung.html.
Recommendation for use:
For full compliance with the EMC legislation, all components and cables
used for device connection must also be compliant with these requirements.
It is therefore necessary to employ BUS and LAN cables with shielded
connectors and these must be installed as per the instructions contained in
the instruction manual.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
and is available for download at
7
Advertisement
Table of Contents
