Answer A Call From Predial Mode - AT&T SB67030 User Manual

Answer a Call from Predial Mode

When an incoming call occurs in Predial mode, the Deskset indicates the incoming call by emitting a single brief tone, moving
the highlight bar to the ringing Call Appearance, and displaying a flashing bell icon next to an available Call Appearance as shown
in Figure 154.
To answer a call in Predial mode:
12:30PM Thu Feb 23 2008
9-
Graham Bell 232-555-0176
Answ er Ignore Fw dVM
Figure 154. Incoming Call During
Predial Mode
12:30PM Thu Feb 23 2008
Graham Bell 232-555-0176
Transfer Conf Park
Figure 155. Active Call Appearance
Answer a Call
AT&T SB67030 Deskset User's Guide
When there is an incoming call:
The system emits a ringtone (See
0:01
A call screen displays as shown in Figure 154.
To answer the call, do one of the following:
Press
Audio" on page
Quick
Dial
Lift the handset to answer with the handset.
Press SPEAKER to route audio to the speaker.
Press HEADSET to route audio to the Headset.
The Predial Call Appearance disappears and the highlighted call appears next
to the Active Call Appearance icon
0:01
To silence the incoming call, press the
to the Predial Call Appearance (See
Quick
Dial
More 1/3
to answer using the Preferred Audio method (See
38).
, the ringer icon changes to a silenced ringer icon
108
"Sounds" on page 37).
as shown in Figure 155.
soft key. After pressing
and you return
"Ignoring a Call" on page 115).
"Preferred