Call Forwarding - Busy/Don't Answer - AT&T definity 7444 User Manual

To talk privately with a
co-worker after
answering a redirected
call
Call Forwarding — Busy/Don't Answer
To activate Call
Forwarding —
Busy/Don't Answer
Note: To find out
which type of Call
Forwarding  Call Forward 
activates, contact your
System Manager.
1 Press
 Transfer  or  Conference 
Call is temporarily put on hold
2
Press  Consult 
or dial co-worker's extension
Note: You can privately discuss call; if co-worker is not
available, press the fluttering
If your co-worker has activated Send All Calls, you
must use  Consult  to reach your co-worker.
3 Press  Transfer  again to send call to co-worker or press
 Conference  to make it a 3-party call
1 Press  Call Forward  (while off-hook)
or dial Call Forwarding — Busy/Don't Answer code (while
off-hook)
Note: This code is unique to your system and must be
obtained from your System Manager.
2 Dial extension where calls will be sent
Note: If you hear intercept tone, you are attempting to
forward your calls to a restricted telephone, a telephone
with Call Forwarding — Follow Me activated, or a
telephone in another partition or group (if you are in a
tenant services environment). See your System
Manager for more information.
 Drop 
3 Hang up or press
[dial tone]
[priority ring to co-worker]
[single-burst ring to co-worker]
 xxxxx 
to reconnect to call.
[dial tone]
[confirmation tone]
[ _ ]
14