PRODUCT OVERVIEW
12/05
Accessory power output
The harness attached to the panel has a terminal where the signal that is synchronized to
the panel power supply can be taken off. (Figure 17) (Refer to the Wiring Diagrams on
page 117.)
The maximum current of this output terminal is 3 A (Fuse capacity). Do not use a current
higher than 3 A.
For the content of the output terminal, refer to the Wiring Diagrams on page 117.
Figure 8
Buzzer
ACC Output
F1A - 3 AMP Fuse
043801-01EN00
Figure 17
29
JH Series Operation Manual