Accessory Power Output - Yanmar JH Series Operation Manual

PRODUCT OVERVIEW

Accessory Power Output

The harness attached to the panel has a terminal where the signal that is synchronized to
the panel power supply can be taken off. (Figure 21) (Refer to the Service Manual.)
The maximum current of this output terminal is 3 A (Fuse capacity). Do not use a current
higher than 3 A.
For the content of the output terminal, refer to the Service Manual.
Buzzer
ACC Output
F1A - 3 AMP Fuse
043801-01EN00
Figure 21
32
JH Series Operation Manual