Polaris 2009 Trail Boss 330 Service Manual page 191

AUXILIARY BRAKE
REMOVAL / INSTALL
Brake Pedal Removal / Install
1. To remove the brake pedal:
G Remove the footwell
G Remove the cotter key that secures
the brake pedal
G Remove the washers, bushings, and
tension spring
2. Reverse the steps for installation, use a new
cotter key during installation.
AUXILIARY MASTER CYLINDER ASSEMBLY
Brake Reservoir
Foot Brake Line
Foot Pedal
Mount Plate
Bushings
Washers
MC Bolts
8 ft.lbs.
(11 Nm)
Rear Brake Master Cylinder Removal /
Install
1. If necessary, remove the rear brake line from the
master cylinder. Use a suitable container to catch
the brake fluid. Dispose of brake fluid properly.
2. Remove the two bolts that secure the rear master
cylinder to the brake mount plate. Replace parts
as needed.
3. To install the rear brake master cylinder, mount
the master cylinder to the mount plate and torque
bolts to 8 ft.lbs. (11 Nm).
4. Reinstall the brake line and torque the banjo bolt
to 15 ft.lbs. (21 Nm).
Auxiliary
Master Cylinder
15 ft.lbs.
(21 Nm)
BRAKES
9.23