Table of Contents
Advertisement
In the unlikely event that an overtemperature conditions occurs, see
Chapter 6, Troubleshooting for information on restarting your projector.
ADJUSTING THE IMAGE
Raising or lowering the image
To raise or lower the projected image, tilt the mirror on top of the arm up
(to move the image higher) or down (to move the image lower).
Focusing the image
To focus the image, rotate the ring just below the projection lens, beneath
the mirror, until the image is sharp and clear.
Figure 1-29, Rotating the focus ring
Setting Up Your Projector
1-23
Advertisement
Table of Contents
