Adjusting The Image - Proxima DP1200x User Manual

Adjusting the image

Adjust the height of the projector, if necessary, by pressing the release but-
ton to extend the elevator foot.
Position the projector the desired distance from the screen at a 90 degree
angle to the screen.
See page 38 for a table listing screen sizes and distances.
Adjust the zoom tab or the focus dial by rotating them until the desired
image size and sharpness are produced.
If the image is not square, adjust the keystone by using the buttons on the
keypad.
Press the upper Keystone button to reduce the upper part of the image, and
press the lower Keystone button to reduce the lower part.
Adjust the Contrast or Brightness in the Picture menu.
See page 27 for help with the menus.
adjust height
adjust distance
adjust zoom and focus
adjust keystone
adjust Contrast or Brightness
10
release button
zoom focus