Table of Contents
Advertisement
7 Gently tilt the mirror open to approximately 45 degrees (you can adjust
the angle of the mirror later, to raise or lower the projected image).
Figure 1-6, Opening the flip mirror
CAUTION! Never push on or force the mirror. Always use care when
opening the mirror assembly. Avoid touching the surface of the mirror with
your fingers.
Closing the projector
To close the projector, reverse the opening procedures.
1 Tilt the mirror down into the arm until it latches.
2 Gently swing the arm down until it clicks into place. The latch should
click when the arm is completely stowed.
Moving the projector
You should securely close the projector and disconnect all cables before
moving it. The projector has a recessed carrying handle on its side. To access
the handle, just push one side of it in, and the other side will automatically
release (see the next figure).
1-4
Chapter One
Advertisement
Table of Contents
