Proxima Desktop Projector 9100 User Manual page 27

Silicon Graphics 13C3 Video Connections
If you have a Silicon Graphics workstation with 13C3 connectors at the
computer and monitor video ports:
1 Disconnect your computer-to-monitor cable at the computer end.
2 Connect the free end of the monitor cable to the Proxima
SGI to LCD adapter (C947-12).
3 Connect the free end of the SGI to LCD adapter to the projector's
COMPUTER OUT connector.
Note: SGI workstation users who do not connect an external monitor will
need to set DP9100 sense lines to achieve the desired display resolution.
Refer to Appendix C: Sense Lines for more information.
4 Use the Proxima SGI 13C3 to LCD connector cable (C943-6) between the
projector and the computer. Connect the end marked "LCD" to the
projector's COMPUTER IN connector, and the end marked "COMPUTER"
to the SGI workstation's video output connector.
Figure 1-18, Silicon Graphics workstation connections
1-14 Chapter One
Monitor Cable
SGI to LCD Adapter
Proxima SGI Cable
WORKSTATION