Table of Contents
Advertisement
PROJECTOR
Figure 1-14, The Proxima Mac to LCD adapter
3 Connect the free end of the Mac to LCD adapter to the projector's
VGA OUT connector.
Note: Macintosh users who do not connect an external monitor may need to
set DP9100 sense lines to achieve the desired display resolution. See
Appendix C: Sense Lines for more information.
4 Use the Proxima MAC to LCD connector cable (C802-6) between the
projector and the computer. Connect the end marked "LCD" to the
projector's COMPUTER IN connector, and the end marked "COMPUTER"
to the computer's video output connector.
DP9100
Proxima Mac to LCD
VGA OUT
Adapter
Port
Figure 1-15, The Proxima Mac to LCD Adapter
MACINTOSH
Existing MAC
Monitor Cable
Setting Up Your Projector
1-11
Advertisement
Table of Contents
