Table of Contents
Advertisement
Adjusting fade and balance
The fade slider allows you to choose between the projector's internal
speakers and an external loudspeaker system like the Proxima Powered
Loudspeaker System (A55). The balance slider allows you to control the
level of sound between the left and right sides of your sound system.
To adjust the fade and balance, choose the corresponding command on the
Audio menu, then move the slide bar in the appropriate direction.
Adjusting the volume of the microphone
To increase or decrease the volume of the microphone, choose Mic. Volume
from the Audio menu, then move the slide bar in the appropriate direction.
Switching between stereo and monaural mode
To switch between stereo and monaural mode, choose Audio Mode from
the Audio menu, then choose the appropriate setting.
ADJUSTING REMOTE MOUSE TRACKING
Use this setting to adjust how fast the pointer moves. To increase or decrease
the remote mouse tracking, choose Mouse Tracking from the Tools menu
and move the slider in the appropriate direction.
PRESENTATION FEATURES
Once you've adjusted the image and audio settings, you're ready to start
your presentation. This section describes some of the features of the DP9100
that you'll want to use during your presentations.
Using the LightBoard tool
The LightBoard™ tool is a unique feature that lets you draw on or annotate a
projected image. You can choose from three styles:
• Overlay lets you highlight or draw on top of the projected image.
• WhiteBoard clears the screen to provide a bright background for drawing.
• BlackBoard clears the screen to provide a dark background for drawing.
To use the LightBoard tool:
1 Open the menus and choose Tools.
2-8
Chapter Two
Advertisement
Table of Contents
