Table of Contents
Advertisement
PORT
MIC
COMPUTER
IN
COMPUTER
OUT
VGA OUT
To connect the DP9100 to virtually any PC, Macintosh, or workstation,
choose the Proxima cable(s) that matches your existing
computer-to-monitor connection.
You normally need only one Proxima cable. This cable is used to connect
the projector to your computer's video output connector. Use the existing
computer-to-monitor cable if you also want to connect your monitor.
You can connect the computer-to-projector cable with the projector and
computer power on. Available cables include:
• 13C3 to LCD Connector Cable (C801-6)
• VGA to LCD Connector Cable (C800-6)
• Mac to LCD Connector Cable (C802-6)
• Mac to LCD Adapter (C804-0)
• SGI 13C3 to LCD Connector Cable (C943-6)
• SGI to LCD Adapter (C947-12)
• DEC 3C3 to LCD Connector Cable (C948-6)
• DEC 3C3 to LCD Adapter (C947-10)
• Optional BNC Block to LCD Connector Cable (C942-2)
• Optional BNC to LCD Connector Cable (C803-6)
Computer video always connects to the COMPUTER IN connector (13C3)
on the projector.
1-8
Chapter One
CONNECTS TO...
Connects an external
microphone to the projector.
Connects to the computer to
bring computer video into the
projector.
Connects a workstation
monitor to the projector for
simultaneous display.
Connects a PC or Macintosh
monitor to the projector for
simultaneous display.
...WITH THIS CABLE
External microphone cable.
PC: C800-6, Mac: C802-6, Sun: C801-6
SGI: C943-6, DEC: C948-6.
Existing monitor cable. You may also
need to use an adapter.
Existing monitor cable. You may also
need to use an adapter.
Advertisement
Table of Contents
