Table of Contents
Advertisement
CONNECTING THE PROJECTOR TO YOUR COMPUTER
Take a moment to review the projector's connector panel.
Video 1 S-Video 1
Audio 1 In
Audio 2 In
Video 2
S-Video 2
Computer
Audio Out
Audio In
Computer In
Computer Out
Figure 1-10, The connector panel
PORT
CONNECTS TO...
AUDIO 1 In
Left and right ports connect to
AUDIO 2 In
a video source, brings audio
into the projector.
VIDEO 1
Connects the projector to a
VIDEO 2
video camera, laserdisc player,
television, or a VCR
(NTSC/ PAL/SECAM source)
to bring video from these
sources into the projector.
S-Video-1
Connects the projector to an
S-VIdeo-2
S-Video source to bring video
into the projector.
COMPUTER
Left and right ports connect to
AUDIO IN
the computer, brings audio
into the projector.
AUDIO OUT
Connects to external speakers
or an external sound system to
send stereo audio out.
CYCLOPS*
Connects to the computer to
use the Cyclops F/X software
or the optional Cyclops
interactive pointer system.
* Instructions for connecting to this port are also included in the Cyclops
User's Guide.
MIC Cyclops
VGA Out
...WITH THIS CABLE
Composite audio/video cable
(C497-6).
Composite audio/video cable
(C497-6).
S-Video cable (C466-6).
Computer audio cable (C498-6) .
Audio cable.
RS-232 cable (PC C936-6),
(MAC C470-6), (Workstation C902-6
and C903-6).
Setting Up Your Projector 1-7
Advertisement
Table of Contents
