Table of Contents
Advertisement
CONNECTING POWER TO THE PROJECTOR
The power cord receptacle and AC POWER switch are located below the
projector's connector panel.
Figure 2-7 Power receptacle and AC Power switch
1 Plug the appropriate power cord for your location into the power
receptacle on the side of the projector.
2 Connect the power cord to a properly-grounded wall outlet.
CONNECTING COMPUTER VIDEO
Connecting a PC
Use the included VGA video cable to connect your PC to the projector.
If you want to use your monitor and DP5500 at the same time, use your
existing monitor cable to connect the projector to a separate monitor.
Figure 2-8 VGA Video cable
2-6
Chapter Two
VGA Connector Cable
Advertisement
Table of Contents
