Advertisement
4-mm screw with
captive washers
)LJXUH6\VWHP%RDUG$VVHPEO\
10. Remove the modem (if present).
11. Lift the system board assembly out of the bottom case assembly.
5HSOD.LQJWKH6\VWHP%RDUG
1. Install the replacement system board.
2. Replace the modem (if present).
3. Replace the system board mounting screws.
4. Replace the microprocessor, the palmrest assembly, the display assembly
NOTE: Be sure to transfer the memory module(s) to the replacement system
board assembly.
5. Replace the modular bay devices and any PC Cards or plastic blanks in the
6. Insert the diskette (or CD-ROM) that accompanied the replacement system
NOTE: After replacing the system board assembly, be sure to enter the sys-
tem's service tag number into the BIOS of the replacement system board
assembly.
support.dell.com
white marks on
the system board
bottom case assembly
and the keyboard assembly.
PC Card slot.
board assembly into the appropriate drive, and turn on the computer.
Follow the instructions on the display screen.
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
system board assembly
10-mm screw (system
with modem)
or 4-mm screw (system
without modem)
M2.5x4
M2.5x10
35
Advertisement
