Advertisement
'LV.RQQH.WLQJ,QWHUID.H&RQQH.WRUV
Some of the computer's interface connectors are zero insertion force (ZIF)
connectors. These connectors are not removable, but they must be released
to disconnect the cable from them (see Figure 4).
)LJXUH'LV.RQQH.WLQJD&DEOHIURPDQ,QWHUID.H&RQQH.WRU
127,&( 7KH=,)LQWHUID.H.RQQH.WRUVDUHIUDJLOH7RDYRLGGDPDJH
GRQRWDSSO\WRRPX.KSUHVVXUHWRWKHPRYDEOHSDUWRIWKH.RQQH.WRU
5HPRYLQJD&DEOHIURPD=,),QWHUID.H&RQQH.WRU
1. Insert a small flat-blade screwdriver behind the movable part of the
2. Push gently sideways on the movable part of the connector until it releases
3. Grasp the interface cable and pull it out of the connector.
5HSOD.LQJD&DEOHLQWRD=,),QWHUID.H&RQQH.WRU
1. Use a small flat-blade screwdriver to open the movable part of the ZIF
2. Orient the end of the interface cable with the ZIF connector, and insert the
3. While holding the cable in place, close the ZIF connector.
support.dell.com
movable part of
connector
(do not remove)
connector.
the interface cable.
connector.
end of the cable into the connector.
To ensure a firm connection, make sure the ZIF connector is completely
closed.
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
5
Advertisement
