Advertisement
0RGHP$VVHPEO\
The modem assembly is optional. The modem (if present) must be removed
before the main system board can be removed (see Figure 21).
127,&( 7RDYRLGGDPDJLQJWKHV\VWHPERDUG\RXPXVWUHPRYHWKH
PDLQEDWWHU\EHIRUH\RXVHUYL.HWKH.RPSXWHU
5HPRYLQJWKH0RGHP$VVHPEO\
1. Remove the main battery and secondary battery (if present).
2. Remove the keyboard assembly.
3. Remove the display assembly.
4. Remove the palmrest assembly.
5. Remove the 10-mm screw and washer securing the modem assembly (see
)LJXUH0RGHP$VVHPEO\
5HSOD.LQJWKH0RGHP$VVHPEO\
1. Press the RJ11 connector of the modem assembly into the hole in the bot-
2. Carefully align and press the modem into the system board connector.
3. Replace the internal modem 10-mm screw and washer (see Figure 21).
support.dell.com
Figure 21).
system board
connector for the modem
tom case assembly.
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
10-mm screw
case plug for modem
internal modem
M2.5x10
33
Advertisement
