Advertisement
127,&( 7RDYRLGGDPDJLQJWKHV\VWHPERDUG\RXPXVWUHPRYHWKH
PDLQEDWWHU\DQGVH.RQGDU\EDWWHU\ LISUHVHQW EHIRUH\RXVHUYL.H
WKH.RPSXWHU
8. Remove the main battery from the battery bay.
)LJXUH0DLQ%DWWHU\5HPRYDO
9. Remove the secondary battery assembly (if present) from the modular bay.
10. Ground yourself by touching the unpainted metal surface of the I/O panel
6.UHZ,GHQWLIL.DWLRQ
The illustrations in the following removal procedures provide the correct screw
length as part of the screw's label. A graphic for that length screw is also
included in the illustration. Examples are shown in Figure 3. Match the actual
screw to the graphic in the illustration to check for correct length.
)LJXUH6.UHZ,GHQWLIL.DWLRQ
127,&( :KHQUHLQVWDOOLQJDV.UHZ\RXPXVWXVHDV.UHZRIWKH.RU
UH.WGLDPHWHUDQGOHQJWK2WKHUZLVHKDUGZDUHGDPDJH.RXOGUHVXOW
0DNHVXUHWKDWWKHV.UHZLVSURSHUO\DOLJQHGZLWKLWV.RUUHVSRQGLQJ
KROHDQGDYRLGRYHUWLJKWHQLQJ
support.dell.com
Slide the battery bay latch toward the right side of the computer. Then slide
the battery out of the battery bay (see Figure 2).
battery bay latch
on the back of the computer.
While you work, periodically touch the I/O panel to dissipate any static
electricity that might harm components.
M2.5x20
M2.5x10
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
M3.0x5
M2.5x4
M2.5x4
battery
M3.0x3
M2.0x3
3
Advertisement
