Dell Latitude CPt V/CPt S series Service Manual page 22

14 Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
2. Align the memory module's edge connector with the slot in the center of
the memory module socket. With the module at a 45-degree angle, press
the memory module's edge connector firmly into the memory module
socket.
3. Pivot the memory module down until it clicks into place. If you do not hear
a click as each end of the memory module snaps into the tabs, remove the
memory module and reinstall it.
4. Replace the memory module cover.
.H\ERDUG$VVHPEO\
127,&( 7RDYRLGGDPDJLQJWKHV\VWHPERDUG\RXPXVWUHPRYHWKH
PDLQEDWWHU\EHIRUH\RXVHUYL.HWKH.RPSXWHU
127,&( 0DNHVXUHWKDWWKHZRUNVXUID.HLV.OHDQWRSUHYHQW
V.UDW.KLQJWKH.RPSXWHU.RYHU
5HPRYLQJWKH.H\ERDUG$VVHPEO\
1. Remove the main battery and secondary battery (if present).
2. Close the display assembly, and turn the computer upside down on a flat
work surface.
10-mm screws (7)
)LJXUH 5HPRYLQJWKH.H\ERDUG$VVHPEO\6.UHZV
M2.5x10