Advertisement
127,&( 0DNHVXUHWKDWWKHZRUNVXUID.HLV.OHDQWRSUHYHQWV.UDW.K
LQJWKH.RPSXWHU.RYHU
5. Turn the computer upside down on a flat work surface.
6. Remove the five 20-mm screws that secure the palmrest to the computer.
7 . Turn the computer right-side up on the work surface.
8. Disconnect the palmrest flex cable from the touch-pad connector on the
palmrest assembly
)LJXUH3DOPUHVW$VVHPEO\5HPRYDO
9. Carefully remove the palmrest assembly from the bottom case assembly
support.dell.com
These screws, labeled with a " circle P ," are located underneath the front
edge of the computer (see Figure 19).
system board (see Figure 20).
touch-pad
connector
bottom case assembly
(see Figure 20).
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
palmrest flex cable
31
Advertisement
