Advertisement
18
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
0L.URSUR.HVVRU0RGXOH
3-mm screws (2)
microprocessor shield
4-mm screw (1)
shield brace
(may not apply
to your system)
white marks on the
microprocessor board (2)
microprocessor module
)LJXUH0L.URSUR.HVVRU0RGXOH5HPRYDO
5HPRYLQJWKH0L.URSUR.HVVRU0RGXOH
127,&( 7RDYRLGGDPDJLQJWKHV\VWHPERDUG\RXPXVWUHPRYHWKH
PDLQEDWWHU\EHIRUH\RXVHUYL.HWKH.RPSXWHU
1. Remove the main battery and secondary battery (if present).
2. Remove the keyboard assembly.
127,&( 7RHQVXUHPD[LPXP.RROLQJIRUWKHPL.URSUR.HVVRUGRQRW
WRX.KWKHKHDWWUDQVIHUDUHDVRQWKHWKHUPDO.RROLQJDVVHPEO\7KH
RLOVLQ\RXUVNLQUHGX.HWKHKHDWWUDQVIHU.DSDELOLW\RIWKHWKHUPDO
SDGV
3. Remove the two 3-mm screws on the microprocessor shield securing the
thermal cooling assembly to the microprocessor module (see Figure 12).
4. Loosen the three captive screws securing the microprocessor shield to the
microprocessor module.
captive screws (3)
thermal cooling
assembly arm
M2.5x4
M2.0x3
Advertisement
