Specifications; Before Assembly - Schwinn 270 Assembly Manual / Owner's Manual

_._
MaximumUserWeight:
49.9" Power Requirements:
(126.8 cm) Operational Voltage:
Operating Current:
>_64" RegulatoryApprovals:
(162.5 cm) AC Power Adapter:
_" (70.3 cm)
300 Ibs. (136 kg)
Operational Voltage 9VDC
1500 mA
UL listed, CECcertified (or equivalent), Rated
120V 60Hz Input, 9VDC, 1500mA Output.
Class 2.
This product, its packaging, and components contain chemicals known to the State of California to cause cancer,
birth defects, or reproductive harm. This Notice is provided in accordance with California's Proposition 65. If you
would like additional information, please refer to our website at www.nautilus.com/prop65.
BeforeAssembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 74.6" x 110.5" (189.5 cm x 280.5 cm).
Basic AssemblyTips
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety Instructions" before assembly.
• Collect all the pieces necessary for each assembly step.
Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly can require 2 people.