Specifications; Before Assembly - Schwinn 700IC Assembly Manual / Owner's Manual

Hide thumbs Also See for 700IC:
Table of Contents

Advertisement

SPECIFICATIONS

Specifications
Maximum User Weight:
Total Surface Area (footprint) of equipment: 6667.4 cm2
Machine Weight:
Dimensions:
Power Requirements:
Operating Voltage:
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 1.9 m x 1.2 m (73" x 45").
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety Instructions"
before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts
to the right (clockwise) to tighten, and the left (counter-
clockwise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, carefully lift and look through the
bolt holes to help insert the bolt through the holes.
• The assembly requires 2 people.
6
136 kg (300 lb)
46 kg (101 lb)
123.7cm x 53.9cm x 126.6cm ( 48.7" x 21.2" x 49.8")
2 AA Batteries (SUM3)
3VDC
1.2 m (45")
1.9 m
(73")
123.7 cm
(48.7")
0.6 m
(24")
0.6 m
(24")
53.9 cm
(21.2")

Advertisement

Table of Contents
loading

Table of Contents