Advertisement
About: CustomCooL'"(on some models)
LCD Models Only
Non-LCD Models Only
How it Works
The CustomCool'" feature is used to quickly chill
items, thaw items or hold the pan at a specific
temperature. This feature is a system of dampers,
a fan, a temperature thermistor and a heater.
OR
LCD Models
Only
The pan is tightly sealed to prevent
temperature fluctuations in the rest of
the refrigerator.The controls for this pan
are located on the dispenser with the
temperature controls.
ii i iii
ExpressThaw
TM
ExpressChill
TM
How to Use
0
Emptg the pan. Placethe Chill/Thaw trag
In the pan. Placethe items on the trag
and close the pan completely.
0
LCD Models:
Access by: Home > Options > Refrigerator
Options > CustomCool Pan
Non-LCD Models:
Select the ExpressThaw'", ExpressChilF
or SelectTemp'" pad. The displag and SETlight
will come on. Tap the pad until the light
appears next to the desired setting.
Usethe following chart to determine the best
setting to use.
ExpressChill can be set to !5, 50 or/45
minutes. The default is !5 minutes.
To stop a feature before it is finished:
For LCD Models:
Go into that feature's menu and press
the OFF button.
For Non-LCD Models:
Tap that feature's pad until no options
are selected and the displag is off.
During ExpressThaw and ExpressChill,
the displag on the controls will count down
the time in the cgcle (on some models).
After the ExpressThaw cgcle is complete,
the pan will reset to the MEATsetting
(52°F[O°C]) t o help preserve thawed
items until theg are used.
The displaged actual temperature of
the CustomCool pan mag varg slightlg
from the SETtemperature based on
usage and operating environment.
NOTE:Forfood safety reasons,it is recommended
thor foods be wrapped in p!ostic wrap when using
ExpressThaw. Thiswi!! help contoin meot juices
ond improve thowing performance.
How to Remove and Replace the Drawer
To remove:
Pullthe drawer out to the stop position.
Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are
in the unlock position.
Placethe sides of the drawer into
the drawer supports, making sure
the swing locks fit on the drawer slots.
Lock all four swing locks bg rotating them
to the lock position.
Advertisement
