Advertisement
About the temperature controls - GE,Monogram Models.
The unit will have one of the temperature
controls shown below:
Internal
Temperature
r
Controls
External
Set Point
Controls
(0-9)
GE Models
Adjust Temperature
_°'deO
$e,P_int.
CC°]deo
0 is Off/5
is Normal
/ 9 is Coldest
The temperature
controls are preset in the factors
at 5 for both the refrigerator
and
freezer compartments.
To adjust the set point temperature,
press the WARMER or COLDER button on either the
Freezer or Refrigerator
side. The set point light will come on. Press WARMER or COLDER
until the desired setting is reached.
Several adjustments
may be required. Each time you adjust controls,
allow 2z4 hours
after each adjustment
for the refrigerator
to reach the setting you have selected.
Setting either or both controls
to 0 stops cooling in both the freezer and refrigerator
compartments,
but does not shut off electrical power
to the refrigerator.
Control settings
will vary based
on personal
preferences,
usage
and operating
conditions
and may require
more then one adjustment.
NOTE: The refrigerator
is shipped
with protective
film covering the temperature
controls.
If this film was not removed
during installation,
remove
it now.
Ambient temperature limits
This refrigerator is designed to operate in ambient temperatures
specified by its Temperature Class, which is marked on the rating plate.
Temperature
Sgmbol
Ambient
Temperature
Class
Maximum
Minimum
Extended-
Temperate
Temperate
Subtropical
Tropical
SN
N
ST
T
52°C
52°C
58°C
45 °C
!O°C
!6°C
!6°C
!6°C
NOTE: Internal temperature may be affected by such factors as the location of the refrigerator,
ambient temperature and frequency of door openings. Adjust temperature controls as required
to compensate for these factors.
Advertisement
