Advertisement
Trim kits and decorator
panels.
For Built-In Stgle models
Read these
instructions
completely
and carefullg.
Before You Begin
Some models are equipped with trim kits that allow you to install door panels.
Panels less then 6 mm thick
When installing wood pQnelslessthQn 6 mm thick, gODneed to creQte a filler pQnel,such as 3 mm cQrdboQrd, t hQt
will fit between the face of the door and the wood pQnel.If you ore installing the pre-cut decorator pQnels,pre-cut
filler pQnelsare included in the kit. The combined thickness of the decorator or wood pQneland the filler pQnelshould
be 6 mm.
Panels6 mmthickor less
6 mmmax
19 mm or Raised Panel
A raised pQneldesign screwed or glued to a 6 mm thick bQcking,or a 19 mm routed boQrd can be used.
The raised portion of the pQnel must be fabricated to permit cleQrancesof at leQst5.1 cm from the hQndle
side for fingertip cleQrance.
PQnelsthicker thQn 6mm, up to 19 mm max, will require thQt the outer 8 mm of pQnelperimeter be no thicker
thQn 6 mm.
Weight limitations for custom panels:
Refrigerator Door 17 kg max.
FreezerDoor !5 kg max.
Panels thickerthan6 rnrn
6 mmThick
Racking
6 mmmax
19mm
J
5.1cm
Clearance
HandleSide
Appearance
Panel
19 mm
Refrigerator
Door
20
Advertisement
