Advertisement
Inserting
the door panels.
Read these
instructions
completely
and carefully.
0
Insert
the Freezer Panel and Refrigerator
Panel.
Carefully push the freezer panel in until it slides into the
If your model has a dispenser,this step only applies
slot behind the door handle. Pushthe filler panel (required
to the refrigerator panel and top freezer panel.
with some door panels)in behind the decorator panel.
Repeatfor refrigerator panel.
0
Insert
the Bottom
Freezer Panel (on dispenser
models).
Carefully push the panel in until it slides into the slot
behind the door handle. Pushthe filler panel (required
with some door panels)in behind the decorator panel.
Attach the Top Trim on the Freezer and Refrigerator
Doors.
The TopTrim can be found inside the refrigerator
of each door. Hand tighten only. Make sure that the top
compartment,
of each panel fits snugly behind the lip of the Top Trim.
With a T-20 Torxdriver,attach the Top Trim, using
two screws on each Top Trim piece, to the top
Cut-Out
SideTrim
SideTrim
22
Advertisement
