Advertisement
About the crispers
and pans.
Not all features
are on all models.
Fruit
and
Vegetable
Crispers
Excesswater that mag accumulate in the bottom
of the drawers should be wiped drg.
On some models the bottom drawer has
a cover that slides back as the drawer is opened.
This allows full access to the drawer. As the
drawer is closed,the cover will slide forward
into its original position.
HUMIIDNTYCONTROL
Adjustable
Humidity
Crispers
Slide the control all the wag to the J
(high)setting to provide high humiditg
recommended for most vegetables.
Slidethe control all the wag to the _
(low)
setting to provide lower humidity levels
recommended for most fruits.
Convertible
Meet Pun
The convertible meat pan has its own cold air
duct to allow a stream of cold air from the freezer
compartment to flow to the pan.
The variable temperature control regulates
the air flow from the Climate Keeper.
TM
Set the control to the _
(coldest)setting
to store fresh meats.
Set the control to Q_ (cold)to convert
the pan to normal refrigerator temperature
and provide extra vegetable storage space.
The cold air duct is turned off. Variable settings
between these extremes can be selected.
About crisper removal.
Not all features are on all models.
14
Crisper
Removal
The top crispers can easilg be removed bg pulling
the drawer straight out and lifting the drawer
up and over the stop location.
If the door prevents gou from taking out the
drawers, first trg to remove the door bins.
If this does not offer enough clearance, the
refrigerator will need to be rolled forward until
the door opens enough to slide the drawers out.
In some cases,when gou roll the refrigerator out,
gou will need to move the refrigerator to the left
or right as gou roll it out.
To remove the bottom crisper:
0
Pullthe drawer out to the stop position.
0
Rotate all four swing locks to the unlock
position.
0
Lift the front of the drawer up and out.
To replace the bottom crisper:
Make sure all four swing locks are
in the unlock position.
Placethe sides of the drawer into the drawer
supports, making sure the swing locks fit
on the drawer slots.
Lock all four swing locks bg rotating them
to the lock position.
Advertisement
